Question 1

Your customer IS interested in me new MSA storage array and asks tor a demo Of the features and monitoring capabilities.
which tool should you use?

Accepted Answer

According to HPE, SMU is a web-based interface that enables you to configure, monitor, and manage storage devices. It also provides performance monitoring
and reporting for HPE MSA storage array1s. With SMU, you can demonstrate the features and monitoring capabilities of the new MSA storage array to your
customer.

Question 2

Match the RAID level with its capacity overhead. (Each option may be used once, more than once, or not at all.)

Accepted Answer

RAID 0: This level has zero overhead from capacity perspective, as it uses all the available disk space for data storage without any redundancy or parity.
However, it also has no fault tolerance and if one disk fails, all data is lost12.
 RAID 1: This level has capacity of one drive as overhead, as it uses disk mirroring to create an exact copy of data on two or more disks. This provides high
reliability and fault tolerance, but reduces the usable disk space by half12.
 RAID 5: This level has capacity of one drive as overhead, as it uses disk striping with parity to distribu data and parity blocks across three or more disks. This
provides a balance between performance and reliability, as it can tolerate one disk failure without losing data12.
 RAID 6: This level has capacity of two drives as overhead, as it uses disk striping with double parity t distribute data and two parity blocks across four or more
disks. This provides higher reliability and fault tolerance than RAID 5, as it can tolerate two disk failures without losing data12.

Question 3

A customer needs Help setting up their bootable logical drive/volume, checking online drive firmware activation readiness, and managing device identification
LEDS
What HPE tool should you recommend?

Accepted Answer

the HPE Smart Storage Administrator (SSA) is a web-based application that helps you configure, manage, diagnose, and monitor HPE ProLiant Smart Array
Controllers and now other storage devices as well, such as host bus adapters (HBAs), HPE Storage controllers, and future devices such as SCSI Express drives,
and SAS switch devices.
Some of the features of the HPE SSA include:
 Creating a bootable logical drive
 Checking online drive firmware activation readiness
 Managing device identification LEDs
 Configuring drive erase
 Creating and managing arrays and logical drives
 Viewing controller and drive status and health information
 Updating controller firmware

Question 4

/HPE0-V25-exam/ (60 Q&As)
you need to explain how the HPE GreenLake platform can help your customers business become more agile. What information you provide? (Select two)

Accepted Answer

HPE GreenLake is a cloud services platform that delivers on-demand capacity and planning, combining the agility and economics of the public cloud with the
security and performance of on-premises IT. Some of the benefits of HPE GreenLake include:
 Customers can control costs since advanced metering allows them to only pay for what is used: HPE GreenLake offers a pay-per-use model that aligns costs
with actual usage, reducing overprovisioning and improving cash flow. Customers can also scale up or down as needed and only pay for what they use.
 HPE actively monitors, manages, and deploys capacity ahead of demand so the customer can scale with ease within an installed buffer: HPE GreenLake
provides customers with buffer capacity that is ready to use in minutes, not months, enabling them to respond quickly to changing business needs. Customers can
also access a range of cloud services from HPE and partners through a self-service portal.

Question 5

Your customer needs to consolidate data and add additional block-based storage to their man document management application. They nave five standalone
servers with 10Gb networking
Which storage technology should you recommend?

Accepted Answer

According to IBM, a SAN is a dedicated network that provides access to consolidated, block-level data storage 1. A SAN allows multiple servers to access shared
pools of storage devices, such as disk arrays or tape libraries1. A SAN can help your customer consolidate data and add additional block-based storage to their
main document management application.

Question 6

Which combination of HPE solutions can provide data validation on MSL3040 andLTO-9 cartridges?

Accepted Answer

Library and Tape Tools and HPF StoreEver TapeAssure Advanced Software: This combination is correct, as Library and Tape Tools (L&TT) is a diagnostic tool
that allows you to perform firmware upgrades, run tests, and verify data on tape devices. HPE StoreEver TapeAssure Advanced Software is a software that
provides data integrity, performance, health, and utilization reports for tape drives and cartridges, and it works with L&TT to perform data verification2 .

Question 7

Match each HPE tool with its business value.

Accepted Answer

HPE Product Bulletin:Aides with the purchase, sale, and support of HPE solutions by providing technical overviews and specifications.
 HPE CloudPhysics:Provides data-driven insights to improve IT performance, ROI, and data protection through analysis of IT metadata.

/HPE0-V25-exam/ (60 Q&As)
 Solution Sales Enablement Tool:Provides curated information about HPE strategy and solutions as well as sales, marketing, and technical information aligned
to specific solutions.
 HPE Seismic:Accurately size and efficiently deliver world-class solutions on HPE GreenLake Lighthouse, which powers HPE GreenLake Cloud services and
HPE infrastructure.
HPE CloudPhysics:https://www.hpe.com/us/en/storage/cloudphysics.html
 Solution Sales Enablement Tool:https://sset.ext.hpe.com/
 HPE
Seismic:https://www.hpe.com/us/en/newsroom/blog-post/2021/02/hpe-reimagines-customer-and-partner-e

Question 8

What value does deploying workloads on HPE GreenLake provide? (Select two.)

Accepted Answer

HPE GreenLake is a cloud services platform that delivers on-demand capacity and planning, combining the agility and economics of the public cloud with the
security and performance of on-premises IT. Some of the benefits of HPE GreenLake include:
 Pay for resources consumed: HPE GreenLake offers a pay-per-use model that aligns costs with actual usage, reducing overprovisioning and improving cash
flow. Customers can also scale up or down as needed and only pay for what they use.
 Capacity ahead of demand: HPE GreenLake provides customers with buffer capacity that is ready to use in minutes, not months, enabling them to respond
quickly to changing business needs. Customers can also access a range of cloud services from HPE and partners through a self-service portal.

Question 9

What benefitdoes using HPE GreenLake central providefor customers?

Accepted Answer

This is because HPE GreenLake Central is an online portal that enables customers to manage and optimize their hybrid cloud environments. It provides a unified
view of the costs, capacity, consumption and compliance of their on-premises GreenLake systems and their public cloud platforms such as AWS and
Azure. It also offers insights and recommendations to help customers improve their IT performance, ROI and data protection.123

Question 10

Map the HPE platform and workload-oriented solutions with the customer’s challenge.

Accepted Answer

Containers solutions -> Simplify acquisition and deployment of complex systems1
Data Management and
Analytics solutions -> Accelerate time to value from insights2 management3
Hybrid Cloud solutions -> Unify operations and
Transcoding & Visualization solutions -> Provide stability to scale anywhereVDI solutions -> Improve user experience while managing costs